cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13054
Views
5
Helpful
16
Replies

CISCO 7821 AND ASTERISK

jessembaruk
Level 1
Level 1

I have a number of Cisco 7821 phones and I would like to have them work with asterisk, problem is I cannot seem to have them register with asterisk, I have a couple of Cisco 7911 and 7960 which have already registered. Are 7800s configured differently from from 7900? Would anyone be kind enough to share their config files?

16 Replies 16

jonallport
Level 1
Level 1

Try forcing them to use TCP (in Asterisk extensions.conf).  That was my initial issue with the 7945 and 9.3+ firmware

sibun
Level 1
Level 1

Hi Jessembaruk,

I have a customer who wants to use 7921 phones with Asterisk. How did you solve this challenge?

Your assistance is highly appreciated,

Sibusiso.

It would be worth to post your question at the Asterisk forum:

http://www.asterisk.org/community

Regards

Deepak

I have a customer who wants to use 7921 phones with Asterisk. How did you solve this challenge?

I can provide assistance but please create a new thread. 

Also post the SEPmacaddress.xml.cnf file of the phone.

Hi Leo,

As requested, I have opened a new thread,

https://supportforums.cisco.com/discussion/12879996/cisco-7821-connected-asterisk-call-control

Looking forward to your assistance,

Sibusiso,

Douglas Pereira
Level 1
Level 1

Hey...use this example in MS Word, it´s working on my Customer.

Doug, Thank you for this. I was able to utilize this and get a phone registered. Any tips for dial plan?

hello!

do you think you could zip me all the needed files for the purpose of this configuration?

i really want to test your solution!

Yes. I will do this tomorrow

Doug

Thank you so much 😊

Sorry for my delay.

 

Follow the Files with the explanations ans one file model.

 

You´ll need a litle tftp for upload the files to Cisco Phone.

 

Best Regards,

Doug

ive alllready mananed and made it work!!

 

thanks a milion! much appreciated :)

 

Many thanks!

it worked! any idea how can i enable missed calls etc?

 

as i dont get to see any, its like its missing the function

helloo :) Gentle Reminder 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: