Cisco Call manager and ITSP

[slaam2013]

I need help please , i have a CUCM v8.6 and it is working so fine . Our ITSP decided to use SIP , so i have to integrated with my ITSP using SIP . I have a router with CUBE license and all is ok , i need help for the below:

1- What is the best solution (call manager - sip - cube - sip -ITSP) or (call manager- h323-cube-sip-ITSP).

2- I need a helpful documnet for Cube configuration which show me the integration CUCM and ITSP using ITSP and configuration of dial plans and how to make sure that inocming and outgoing calls are ok.

[James Hawkins]

I would go SIP for all call legs as it is easier to troubleshoot and a mixed H.323/SIP setup does not have any benefits (that I can think of).

The link below has some good examples to get you started.

http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805bd13d.html

[Ayodeji Okanlawon]

Kamel,

Have a look at this thread..It discussed about CUBE best practices and it was asked about some one in your shoes too..

https://supportforums.cisco.com/message/3884309#3884309

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

[slaam2013]

aokanlawon

thank you so much , i am so pleasure for your reply .Really i was waiting for your reply . Please i need your assistance for any problems which i will face , i see that you are the best one in sip troubleshooting.

thank you

[Ayodeji Okanlawon]

No problems we will be here to help

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"