06-30-2014 05:08 AM - edited 03-16-2019 11:15 PM
Hi guys,
I have problem with ephone-hunt I want to finish call of hunt group on external mobile number,
but I can't put for final number external mobile number How I can solve this problem?
Configuration of hunt group:
ephone-hunt 1 sequential
pilot 101
list 130, 131, 113, 135, 121
final ------>external mobile number
timeout 10, 5, 5, 5, 5
statistics collect
Tomislav
Solved! Go to Solution.
07-03-2014 10:57 AM
You can try to modify SIP-header using voice class sip-profiles.
Another way is configuration on dial-peer:
clid network number <number>
Regards,
Kirill
06-30-2014 05:16 AM
Hello!
You should try to use voice hunt-group instead of ephone-hunt.
voice hunt-group 1 sequential
pilot 101
list 130, 131, 113, 135, 121
timeout 10
final <external_phone>
Regards,
Kirill
06-30-2014 05:55 AM
Hi Kirill,
I tried but without success
voice hunt-group 1 sequential
final 8xxxxxxxxx
list 130,131,113,135,121
timeout 10
pilot 101
T.
06-30-2014 06:09 AM
Tomislav,
When u dial mobile phone from your IP-phone, do u use any prefix like 0?
Can u post your config?
Can u try to configure test voice hunt-group with one number? That number should be mobile phone number.
Regards,
Kirill
06-30-2014 10:13 PM
Hi Kirill,
When u dial mobile phone from your IP-phone, do u use any prefix like 0?
No when we calling mobile numbers you are calling 8xxxxxxxxxx
Configuration what you suggested :
ephone-dn 41
number 126
call-forward all 8xxxxxxxxxxxx
voice hunt-group 1 sequential
final 126
list 130,131,113,135,121
timeout 10
pilot 101
dial-peer voice 10 voip
description Outgoing
translation-profile outgoing OUT
destination-pattern 8T
session protocol sipv2
session target dns:sip.provider
session transport udp
voice-class codec 1
dtmf-relay rtp-nte
no vad
voice translation-rule 8
rule 1 /^1.*/ /0096113001/
!
voice translation-rule 9
rule 1 // //
voice translation-profile OUT
translate calling 8
translate called 9
I tried to call local num 126 and call forwarding is working but doesn't work in hunt group
Thank you in advance!
BR
Tomislav
06-30-2014 10:56 PM
Hi!
I was not my suggestion :)
My suggestion was next(according to your configuration):
voice hunt-group 3 sequential
final 126
list 8xxxxxxxxxxxx
timeout 10
pilot 101
dial-peer voice 10 voip
description Outgoing
translation-profile outgoing OUT
destination-pattern 8T
session protocol sipv2
session target dns:sip.provider
session transport udp
voice-class codec 1
dtmf-relay rtp-nte
no vad
voice translation-rule 8
rule 1 /^1.*/ /0096113001/
!
voice translation-rule 9
rule 1 // //
voice translation-profile OUT
translate calling 8
translate called 9
Regards,
Kirill
06-30-2014 11:25 PM
Yes you had right sorry Kirill :( clipboard wasn't clean
voice hunt-group 1 sequential
final 126
list 130,131,113,135,121
timeout 10
pilot 101
ephone-dn 41
number 126
call-forward all 8xxxxxxx
I tried like this too :
voice hunt-group 1 sequential
final 89645270210
list 130,131,113,135,121
timeout 10
pilot 101
07-01-2014 12:10 AM
Can u put Mobile Phone number into list, not into the final?
Regards,
Kirill
07-01-2014 01:54 AM
I put it :
voice hunt-group 1 sequential
list 130,131,113,135,121,8xxxxxxxx
timeout 10
pilot 101
And nothing :(
07-01-2014 02:53 AM
What kind of PSTN connection do u have? through SIP/E1/T1?
Can u turn 'debug isdn q931' or 'debug ccsip messages' on and look, if CME tries to make a call to Mobile Phone and there is any problem with the connection.
Regards,
Kirill
07-01-2014 05:15 AM
07-02-2014 04:53 AM
Please,
Post debug voice ccapi inout and debugi csip messages, while testing case 2.
Regards,
Kirill
07-03-2014 05:05 AM
07-03-2014 05:14 AM
Hello!
I think, that hunt group works fine.
You get
225839: *Jul 3 15:49:42.387: //287721/D6A67B0BB80F/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.34.1.2:5060;branch=z9hG4bK4563622A0
From: "9262999777" <sip:89262999777@sip.provider>;tag=49764274-655
To: <sip:89645270210@sip.provider>;tag=aprqngfrt-ddldl220000a6
Call-ID: F4778862-1DE11E4-B81AC96C-3BA39579@10.34.1.2
CSeq: 101 INVITE
Timestamp: 1404388182
from your sip provider...
Please, post debug ccsip messages for simple call to that mobile phone number from any IP-phone.
In my opinion, you need to modify calling number from
9262999777
to
0096113001
Or ask your SIP-provider to modify...
Regards,
Kirill
07-03-2014 07:10 AM
Hi Kirill
Please check this file
BR
Tomislav
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide