Cisco CCME ephone-hunt

[Tomislav Kranjec]

Hi guys,

I have problem with ephone-hunt I want to finish call of hunt group on external mobile number,

but I can't put for final number external mobile number How I can solve this problem?

Configuration of hunt group:

ephone-hunt 1 sequential
 pilot 101
 list 130, 131, 113, 135, 121
 final ------>external mobile number
 timeout 10, 5, 5, 5, 5
 statistics collect

Tomislav

[Kirill Glushenkov]

Hello!

U have different Invite messages.

Good call:

From: "9262483188"<sip:89262483188@sip.wiland.ru;user=phone>

Bad call:

From: "9262999777"<sip:89262999777@sip.provider;user=phone>

What are this numbers?

U call from outside...try to call from IP-phone to your hunt-pilot...it should work..

Regards,

Kirill

[Tomislav Kranjec]

Hi Kirill,

This second file is ok in the first i did changes

and 483188 replace 999777 I wanted to make more secure but I saw how you

didn't understand and share this original from GW.

​For me is interesting if calls from outside can be redirected to external mobile because this is the case when one operator is alone at night or for a weekend.

I will try to test and call from inside this pilot number but do you know how I can solve my problem.

Thanks in advance!

Tomislav

[Kirill Glushenkov · Accepted solution]

You can try to modify SIP-header using voice class sip-profiles.

Another way is configuration on dial-peer:

clid network number <number>

Regards,

Kirill

[Tomislav Kranjec]

Hi Kirill,

I didn't understand totally what is the problem, please can you explain me little bit.

I changed phone numbers manually in the log after capturing just for security and after that provided you with orginal.

Tomislav

[Tomislav Kranjec]

Hi All,

Kirill thank you for your help, After more debugging I found what is the problem :)

I needed to change two things in sip INVITE msg Diversion and From

Please find configuration:

voice class sip-profiles 1
 request INVITE sip-header Diversion modify "<sip:(.*)@(.*>)" "<sip:sip:0123456@10.3.1.1>"
 request INVITE sip-header From modify "<sip:(.*)@(.*>)" "<sip:0123456@sip.wiland.ru>"

[yahsiel2004]

Can you post your telephony-service config? You may need to add the following:

transfer-pattern .T
transfer-system full-blind

Regards,

Yosh

[Tomislav Kranjec]

Hi Yosh,

Please look at:

telephony-service
 sdspfarm units 2
 sdspfarm tag 1 cfb001f6cd3c5a0
 sdspfarm tag 2 xcode9927
 conference hardware
 conference transfer-pattern
 max-ephones 150
 max-dn 450
 ip source-address 172.16.11.1 port 2000
 max-redirect 13
 service local-directory authenticate
 cnf-file location flash:
 cnf-file perphone
 user-locale RU
 network-locale RU
 network-locale 1 RU
 network-locale 2 RU
 network-locale 3 RU
 network-locale 4 RU
 load 7914 S00105000400
 load 7911 SCCP11.9-0-3S
 load 7960-7940 P00308010200
 load 7941 SCCP41.8-5-3S
 load 7961 SCCP41.8-5-3S
 time-zone 32
 time-format 24
 date-format dd-mm-yy
 max-conferences 6 gain 3
 call-forward pattern .T
 moh "music-on-hold.au"
 dn-webedit
 time-webedit
 transfer-system full-consult dss
 transfer-pattern .T
 create cnf-files version-stamp Jan 01 2002 00:00:00

BR

Tomislav

[Tomislav Kranjec]

Hi Yosh,

I tried how you said, but nothing look at conf below:

telephony-service
 sdspfarm units 2
 sdspfarm tag 1 cfb001f6cd3c5a0
 sdspfarm tag 2 xcode9927
 conference hardware
 conference transfer-pattern
 max-ephones 150
 max-dn 450
 ip source-address 172.16.11.1 port 2000
 max-redirect 13
 service local-directory authenticate
 cnf-file location flash:
 cnf-file perphone
 user-locale RU
 network-locale RU
 network-locale 1 RU
 network-locale 2 RU
 network-locale 3 RU
 network-locale 4 RU
 load 7914 S00105000400
 load 7911 SCCP11.9-0-3S
 load 7960-7940 P00308010200
 load 7941 SCCP41.8-5-3S
 load 7961 SCCP41.8-5-3S
 time-zone 32
 time-format 24
 date-format dd-mm-yy
 max-conferences 6 gain 3
 call-forward pattern .T
 moh "music-on-hold.au"
 dn-webedit
 time-webedit
 transfer-system full-blind
 transfer-pattern .T
 create cnf-files version-stamp Jan 01 2002 00:00:00

Case1

voice hunt-group 1 sequential
 final 8xxxxxxxx
 list 130,131,113,135,121
 timeout 10
 pilot 101

Case 2
voice hunt-group 1 sequential
 list 130,131,113,135,121,8xxxxxxxx
 timeout 10
 pilot 101

Case3
voice hunt-group 1 sequential
 final 126
 list 130,131,113,135,121
 timeout 10
 pilot 101

ephone-dn  41  dual-line
 number 126
 call-forward all 8xxxxxxxxxx

[yahsiel2004]

I would verify your dialing prefix like Krill mentioned (+5) and also you can consider having a place holder DN that is set to forward all calls to the mobile number.

ephone-dn 99
number "dummy number"
call-forward all "prefix and mobile number"

voice hunt-group 1 sequential
 final "dummy number"
 list 130,131,113,135,121
 timeout 10
 pilot 101

Regards,

Yosh