Hello friends,
I have Cisco CME router model 3945 and customer given me the E1 isdn pri link from Nortel MSP 7480,
My link , isdn status shows "State = MULTIPLE_FRAME_ESTABLISHED"
Now I want to make a call from my Cisco IP phone extension number is 2001, but call is not connected, showing msg "Unknown number"
But from nortel network calling is happening , means they are able to make a call on my Cisco ip phone "2001"
Please see below for my configuration :
controller E1 0/0/3
framing NO-CRC4
pri-group timeslots 1-31
interface Serial0/0/3:15
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
dial-peer voice 20 pots
destination-pattern 410001...
no digit-strip
port 0/0/3:15
forward-digits all
Note : "4" is the number to reach MSP, "10001" is NTT number & "...." is for internal 4 digit number
Kindly help in this.