Cisco Conferance phone 8831 compatability

[adnanhassan1]

Hi Guys,

Just wondering if someone know Cisco 8831 is compatible with CME version 7.0(1)?

If so, what should be the correct type under 'voice register pool xx'?

Regards

Adnan

[Jitender Bhandari]

Hi,

it is not supported

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.html

for all CME compatibility see below

http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-express/products-device-support-tables-list.html

As i see it is supported with latest.

HTH

JB

[Chris Deren]

No it is not, see:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeroad.html

also, look into CME fast track feature, which I believe was introduced in CME 10.5:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/feature/phone_feature/phone_feature_support_guide.html#_Toc436645184

[Mohammed al Baqari]

+5 Chris. This is supported only starting from 10.5 using fast track feature.