Hi,
We have enabled GW File Accounting on Cisco IOS 2901 router for voice calls.
This is a SIP gateways and the CCSIP Mess debug shows as below:
=================================================================
INVITE sip:9980@52.23.23.36:5070 SIP/2.0
Via: SIP/2.0/UDP 12.0.1.25:5060;branch=z9hG4bK222B82A9C
Remote-Party-ID: <sip:85858585@12.0.1.25>;party=calling;screen=yes;privacy=off
From: <sip:85858585@12.0.1.25>;tag=7422D0E8-7B2
To: <sip:9980@52.23.23.36>
Date: Wed, 17 Sep 2014 18:03:37 GMT
Call-ID: C7FB2010-3DCB11E4-BF608137-34BABCD3@12.0.1.25
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3355083752-1036718564-3017275506-3928082504
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M6a
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1410977017
Contact: <sip:85858585@12.0.1.25:5060>
Call-Info: <sip:12.0.1.25:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 268
===============================================================================
In the CDR, there is a 'Call-ID' field. We assumed that this value should be the same as that of the "Call-ID: C7FB2010-3DCB11E4-BF608137-34BABCD3@12.0.1.25" in the debug but that's not the case. Both the values are quit different.
Is it possible to get the Call-Id value in the CDR same as that of the debug message?
Regards
Saif
