cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
10
Helpful
6
Replies

Cisco IP 7821 non 3PCC version use with external sip provider

Papajesz
Beginner
Beginner

Hello all

I recently got my first VoIP phone the Cisco 7821 and I have zero experience with VOIP phones

 

From what I know I need to enter the sip settings to configure the phone but after some googling, I found out that I got the enterprise version for use with cisco CUCM and it asks for activation code

 

The web interface page doesn't even come up

 

What are my options? I read that this phone can be configured via TFTP for sip but I have no clue where to even start

 

I can't return this phone and I bought two 

I know I really should've got the 3PCC version 

 

Thanks!

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Just to be clear, UPGRADE means you will upgrade the same kind of FW, either enterprise or 3PCC to a higher release.

MIGRATE means you will go from enterprise to 3PCC or viceversa.

 

So, if you mean after you MIGRATE to 3PCC if you will have a configuration GUI, the answer is yes.

HTH

java

if this helps, please rate

View solution in original post

6 Replies 6

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Start by looking at previous threads, the topic has been discussed many, many times at the forum.

 

You can swap from enterprise to 3PCC but there might be an associated cost, details at upgrade.cisco.com

HTH

java

if this helps, please rate