Cisco IP Communicator Lincense

[acerda]

Hi all,

I would like to know how many CIPC phones can I insert on a Cisco Callmanager 4.1.3? What about the weigth or licenses?

Please your suggest

Regards

Andres

[Rob Huffman · Accepted solution]

Hi Andres,

This is an excellent question :) With the release of CUCM 5.x the licensing model completely changed. But in your version there is no license weight/DLU :)

For all 3.x and 4.x versions (including CCM 4.1(3)) the CH-1 (Channel)Phone License (paper) was used and was really totally "honor" based. There was no License actually loaded "on-box" so this is why you can't find any references to them :) Now phones use DLU's (Device License Units) which are loaded on the CUCM First Node or Publisher server. The "Station License" has been replaced with the DLU (Device License Unit) in CCM 5.x and above, also the new model includes "Node and Software Feature" Licenses;

From this good Q & A doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item0900aecd805009fc.shtml

So, CUCM Versions up to 5.x have no onboard licensing restrictions. You can add phones without licenses and CCM does not care. Of course, being the honest people we are this would never happen! But it is strictly "honor based".

Hope this helps!

Rob

[acerda]

Thanks a lot!!

Andres

[acerda]

Hi Bob,

Let me be clear, for example my company bought CIPC licenses for 10 new users. I got a PO# do you know the steps to add those licenses into the Callmanager server? is it necessary?

have a good one.

Regards

Andres