cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
757
Views
0
Helpful
1
Replies

Cisco IP Phone 7975 DND Issue

js
Level 1
Level 1

Hello,

Last week our DND function on our IP Phones stopped working. For some reason the softkey doesn't work. When I press it, nothing happens. There are 2 phones stuck in dnd mode and I can't seem to get them off dnd.

Anyone got an idea how to fix this? I've been looking all over cisco.com and the Internet, but I can't find anything about solving this issue.

Thanks in advance.

ps: If you need more information about the config I have, just ask me.

1 Reply 1

js
Level 1
Level 1

I've been looking around on the forum and I came across a topic saying the DND softkey stops working after CME 4.1 ,in cewilliams's topic. He did post a solution, but I haven't tried it yet. I wanna be certain I won't mess up my current config.

The following command; show ephone ,shows a whole list of ephones. I started comparing all of them and found this:

ephone-18 Mac:xxxx.xxxx.xxxx TCP socket:[23] activeLine:0 REGISTERED in SCCP ver 12 and Server in ver 8

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9

IP:x.x.x.x 50998 7975 keepalive 2598 max_line 8 DnD HuntGroupLogout

button 1: dn 18 number 1017 CH1 IDLE CH2 IDLE shared huntGroupLogout

button 2: dn 14 number 1013 CH1 IDLE CH2 IDLE silent-ring shared

button 3: dn 15 number 1014 CH1 IDLE CH2 IDLE silent-ring shared

button 4: dn 16 number 1015 CH1 IDLE CH2 IDLE silent-ring shared

button 5: dn 17 number 1016 CH1 IDLE CH2 IDLE silent-ring shared huntGroupLogout

What does "huntGroupLogout" & "DnD huntGroupLougout" really mean?

Also the show telephony-service displays:

"hunt-group logout DND"

cewilliams's topic says to add

"hunt-group logout Hlog"

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: