Cisco Phones and SIP

[zak_falingepark]

Hello,

We have some Cisco IP Phones, mainly 7941 and 7911 to use with askterisk. I am trying to get these working. I have found guides on the internet but they seem to be geared around older firmware versions.

The Firmware I have got here is 9.3.

In the OS79xx.txt on user guides it tells me to specify a bin file for example P0S3-8-12-00. My firmware files do not have this.

I was wondering if someone can help me please. I have never done this before so im a little stuck.

Thanks for the help.

Hello,

We have some Cisco IP Phones, mainly 7941 and 7911 to use with askterisk. I am trying to get these working. I have found guides on the internet but they seem to be geared around older firmware versions.

The Firmware I have got here is 9.3.

In the OS79xx.txt on user guides it tells me to specify a bin file for example P0S3-8-12-00. My firmware files do not have this.

I was wondering if someone can help me please. I have never done this before so im a little stuck.

Thanks for the help.

[zak_falingepark]

With this userguide am i on the right track please? http://www.minded.ca/default/2009-12-16/configure-cisco-ip-phones-with-asterisk/

[thijs.vandecasteele]

Hi

Reading your other post (https://supportforums.cisco.com/thread/2194235?tstart=0) I assume you were able to boot up and configure the 7941 on Asterisk?

Rgds

[zak_falingepark]

Yep works a treat, just need to get it (the Cisco phone) to understand we are not in the USA

Thanks