Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Branch Sitewe are using centralised call processing unit in branch site we are using 4fxo line we want make trunk for this 4lines how to make it and how it works in dial-peer also we have to apply this trunk
Hi,We going to upgrade our CUCM cluster (3 Nodes). From Version 7.1.3.10000-11 to 7.1.5.34900-7.I know that CUCM requires 72 Gb free space at installation.But I afraid of upgrade. How does to increase disk usage after upgrade??Now we have one HDD (7...
Hello everyone!I have just a question, I'm installing a Voice Gateway in a branch office that will be receiving inbound calls through PSTN (E1 and T1) and routing these calls to the HQ office, using G.729 as codec.I need to know if I need to transcod...
HiIs there a way to achieve the followingwe have 10 departments and they all need to go out with the hunt pilot number but the internal number has to remain visible on the phoneso we created the followingCSS_Company with 10 PT-departmentroute pattern...
I have an issue where the calling number is truncated on the 7961 phone with calling party normalization configured and routing the call through a UCCX application. I prefix the incoming number with +1 to globalize it and then localize it on the phon...
Hi voice team, Outside calls arrive at extension cisco, but when the cisco extension will transfer the external call to an SIP extension, the connection is dropped.Follow the debug, i test calling the number 4199298275 (mobile) to extension 7060...
CUCM 8is it possible to have a number ring on specific device by day. but after working hours number will go to hunt pilot?thanks
Hi guys,I have the following config:ephone-dn 1 dual-line number 19 snr <Mobile_Number> delay 1 timeout 20 cfwd-noan 99 call-forward busy 99 (voicemail) call-forward noan 99 timeout 21When the call is forwarded to the mobile phone, the operator nu...
hellowi want to knowif it is possible to change a criterion of search in directory for Phone 8941thinks for your help
I posted an earlier question on my VG224 having issues with faxes but, never got a reply so I thought I would elaborate more. My current fax flow is below:Telco – PRI – GW – H323 – CUCM – MGCP – VG224 – Fax/ModemI'm having intermittent faxes failing....
Hi Our organization has a general number and have 4 operators, for example general n umber is 4444 and operators are 4440,4441,4442,4443 when the calls comming to the general number (4444) all these 4 extensions should be ring and one of them can ans...
how to change a background image of phone 8941 SSCPpleez i need your help
Hi NetProsI have a customer with 2 x subscribers that are clustered over a WAN, there are uses and ip phones at each site registered to their local CUCM subscriber server.There are also 2 x unity cxn servers that are also clusted over the WAN and reg...
HI, I need to add 6945 ip phones but my current version on CME is 8.6 which's not compalitble to 6945 IP phones. I just downloded the complete CME verion 8.8 zip files which around 303MB. I want to know how to upgrade my cme 8.6 to...
i am using cisco jtapi, and i have a page that display list of contacts, the select button function is to access the url for the menu item which is the link for the contact details page, and i was wondering if i can make another select softkey that g...
