01-30-2014 05:07 AM - edited 03-16-2019 09:31 PM
Hello to all. Hope this mail finds all of you well.
I have a problem with a CUOM Prime 9.0 discovery configuration.
******
The customer's infrastracture is a cluster CUCM (VM), 9.1.2.
The CUCM cluster is up and running and all the cisco devices can be able to ping each other.
The customer wants to use a Cisco Prime Unified Operations Manager 9.0 in order to monitor all the Cisco devices.
The problem that I faced is that after the CUCM and CUOM 9.0 basic configuration,
in the CUOM 9.0 Device Management/Device Configuration, the discovery devices are "unreachable".
I have checked all the relative parameters and they seem to be ok.
*****
Can anybody help me on that "CUOM device discovery" problem?
Thank you very much in advance.
Regards,
Isidoros
Solved! Go to Solution.
01-30-2014 05:14 AM
Hi Isidoros,
Can you check the points mentioned in the following link
http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/faq/OMFAQ11.html#wp42542
HTH
Manish
01-30-2014 05:14 AM
Hi Isidoros,
Can you check the points mentioned in the following link
http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/faq/OMFAQ11.html#wp42542
HTH
Manish
01-30-2014 05:40 AM
Hello Manish.
Thank you for your help. It was a useful link.
Actually, the problem was a firewall problem.
Now, the CUOM device discovery works fine.
Regards,
Isidoros A.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide