02-02-2017 06:07 AM - edited 03-17-2019 09:23 AM
Hi All,
We are just bought a New IP Phone called CISCO UNIFIED IP CONFERENCE PHONE 8831 , So I will need steps by steps
of how to configure it.
Thanks
02-02-2017 06:08 AM
Are you running CUCM or CME?
Brandon
02-02-2017 06:19 AM
MODEL IS CISCO UC PHONE CP-8831
02-02-2017 06:16 AM
MODEL IS CISCO UC PHONE CP-8831
02-02-2017 06:18 AM
OK. Where are you trying to register the phone? Communications Manager or Communications Manager Express? Or another system?
02-02-2017 06:26 AM
Am trying to register on Communications Manager,
This is the scenario :
1.We have DHCP Server and we are connected to our Network through Switch , so
I have connected this Ip Phone on our POE Switch , it can get an IP Address but still is showing me phone not Registered.
02-02-2017 06:32 AM
Make sure DHCP is handing out option 150 for TFTP and the switch port you are connected to has the proper voice vlan. Also, if you do not have auto registration turned on, you will need to configure the phone in CUCM. Go to CUCM admin > Device > Phone. Either find and copy an existing phone or click Add new.and choose the phone type. Enter the mac address and other required info.
Brandon
02-02-2017 06:55 AM
how to configure VLAN ?
02-02-2017 06:58 AM
interface GigabitEthernet0/1/0
switchport voice vlan 100 (your voice vlan)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide