Cisco Unified IP Conference Phone 8831

[vmugisha]

Hi All,

               We are just bought a New IP Phone called CISCO UNIFIED IP CONFERENCE PHONE 8831 , So I will need steps by steps

of how to configure it.

Thanks

[Brandon Buffin]

Are you running CUCM or CME?

Brandon

[vmugisha]

MODEL IS CISCO UC PHONE CP-8831

[vmugisha]

MODEL IS CISCO UC PHONE CP-8831

[Brandon Buffin]

OK. Where are you trying to register the phone? Communications Manager or Communications Manager Express? Or another system?

[vmugisha]

Am trying to register on Communications Manager,

This is the scenario :

1.We have DHCP Server and we are connected to our Network through Switch , so

I have connected this Ip Phone on our POE Switch , it can get an IP Address but still is showing me phone not Registered.

[Brandon Buffin]

Make sure DHCP is handing out option 150 for TFTP and the switch port you are connected to has the proper voice vlan. Also, if you do not have auto registration turned on, you will need to configure the phone in CUCM. Go to CUCM admin > Device > Phone. Either find and copy an existing phone or click Add new.and choose the phone type. Enter the mac address and other required info.

Brandon

[vmugisha]

how to configure VLAN ?

[Brandon Buffin]

interface GigabitEthernet0/1/0
switchport voice vlan 100 (your voice vlan)