Cisco Unity Port 5060 Closed

[fajar1224]

Hi All,

I Have trunk between CUCM and Unity Connection for voicemail purpose.

After I restart the VM ( since I restart the UCS because of upgrade CIMC OS Activity ) my trunk between CUCM and Unity is not full service with code local=2.

Could anyone help me solving this issue ?

[fajar1224]

I have tested Unity's telnet port 5060 and 5061 from CUCM, but the status is closed, whereas when testing cucm's 5060 and 5061 telnet ports from Unity, the status is open ( success )

[Sadav Ansari]

Hi Fajar,

kindly see the below link for your reference here is the answer of your issue.

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/213718-calls-through-session-initiation-protoco.html