Hi,
I have been asked to provide a Cisco gateway to give connectivity to a 3rd party PBXs through a SIP Trunk. The PBX will be connected to the router through a E1 interface.
One of the requirements is:
If voice channels (B-channels) are occupied during the acquisition of the GW with an E1 interface, the next free B-channel has to be used until all B-channels are occupied. If all B-Channels are occupied than the GW has to signalize this to the telecommunication system.
I was wondering if the Cisco2921 would be able to send the adequate occupied signals.
Thanks in advance.
