05-25-2011 02:45 PM - edited 03-16-2019 05:09 AM
Hello,
Could you please help me with digits transformation? My client has the DID 3251XXXX (E1 connected to the PABX) but this site uses 4100XXXX (this route pattern is also configured). I would like to forward the 4100XXXX insted of 3251XXXX (site-to-site) when calling to other regions. CallManager can do that? Does it have to be changed in the pabx? I tried to set 4100XXXX in the "Called ID DN" option on the gateway configuration and it didn't work, 3151xxxx keeps showing on the display.
Site A Site B
Analog phone->PABX(e1)->Gateway-> ( CM ) -> Gateway ->PABX ->phone
Gateway is configured with H323 and CM is version 6.
Thank you very much,
Henrique Ferreira
05-30-2011 09:51 AM
Hello,
Add more details please,, and confirm if the below call flow correct:
PSTN (3251XXXX) ---- E1 ---- PBX (4100XXXX) ---- CUCM --- > And you want to change the Calling numbers from 3251XXXX -- > 4100XXXX, is that correct?
How the PBX connected to CUCM?
- Did you try Calling Party Transformation? or a Translation Pattern??
Thanks,
Shadi
05-30-2011 11:43 AM
Hello Shadi,
PBX is connected to the gateway, I don't have access to this equipment.
the idea is to change 3251XXXX to 4100XXXX like you said.
My custumer states that PBX dial plan cannot be changed. I tried to use Calling Party Transformation and Translation Pattern, but maybe I didn't configure it correctly.
I'm not sure if the gateway or CM can perform this digits exchange..Any idea?
Thanks,
Henrique
05-30-2011 12:27 PM
I also tried to apply the command "station id-number 41001000" in the voice-port X/X/X:X and it also didn't work.
05-30-2011 02:23 PM
Hi Henrique,
The simple way for you is to create a Translation pattern and there you an modify both calling and called numbers;
- Call Routing >> Class of Control >> Partition: addnew partition"PT_41"
- Call Routing >> Class of Control >> Calling Search Space: addnew one "CSS_41", and select the new partition "PT_41" only.
- Go to the Gateway page >> under "Calling Search Space", memorize the current one and change it to the new "CSS_41"
- Call Routing >> Translation Pattern >> Add new, and fill the parameters as below:
Translation Pattern: 'choose the called number format' or simply use only "!"
Partition: select "PT_41"
Calling Search Space: select the old one that was selected on the Gateway.
Here, you can change anything with Calling and/or called numbers
As you want to change the calling number only, apply the bellow on the Route Pattern:
Calling Party Tranformation Mask: 4100XXXX
Thanks,
Shadi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide