05-16-2007 08:56 PM - edited 03-14-2019 09:32 PM
When users miss a call on their ephone they click on the directory button to see missed calls and then click on the call that they missed. But when they click on the missed call and hit dial the ephone does not know to add a "9" to dialout so the users get a fast busy. How can I fix this?
05-16-2007 09:14 PM
You will need to prefix a 9 or a 91 in front of these numbers when calls come in. Lets assume 214, 469, 972 are local area codes, every thing else is toll call.
create a translation rule,
voice translation-rule 1
rule 1 /^\(214*\)/ /9\1/
rule 2 /^\(972*\)/ /9\1/
rule 3 /^\(469*\)/ /9\1/
rule 4 /^\(.*\)/ /91\1/
voice translation-profile 1
translate calling 1
dial-peer voice 1 pots
incoming called-number .
port 0/0/0:23
transltion-profile incoming 1
This will translate and prefix calls from three local area codes 214,469,972 with a 9, while all other calls with a 91.
Ofcourse this has the side effect of the display on the phone, during the alerting stage, the user will see the calling number with a 9 or 91 prefixed.
HTH
Sankar
PS: please remember to rate posts!
05-16-2007 09:28 PM
Is there a way to just translate outbound calls but not in-bound?
Thanks,
:-)>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide