IP Telephony and Phones

I have check the dial patterns and they all are ok. I have also check the dial pattern from the 2811 and they are ok.The users doesnt know if they are reaching our local 911 or their destinantion 911 office.Any suggestions and what it could be? or wh...

I setup my call manager to get ntp time from a linux ntp server and it is not updating. I used the Microsoft Net time command. Is there some other command I need to run to get NTP setup correctly?Thanks,Steve Hart

Hi, I am about to locate my publisher and subscriber in two different locations linked with a Point-to-Point connection. I am aware of the delay and so on but I would like to ear your feedback on this regard. I would make the phone to register to t...

We have a little bit of a debate going here!We are replacing our Voice Mail with Unity as a first step to a final VoIP solution. Should the PIMG gateway routing point at a specific IP address (the Unity server) or the 9001 # listed in the Cisco docu...

I am using the Cisco IP Phone 7960G for CallManager 4.1(3). As a receptionist, I would like to be able to directly transfer people to voicemail (without waiting for the ext. to ring through) when the callee is unavailable. I do not want to idirect ...

Hello --How can I proactively monitor CCM 5/6.0, and what items will I lose the ability to monitor from the Windows based CCM 4.1?Also what items do you recommend monitoring, to create a trend analysis and help solve problems proactively?Let me know....

Hi I am trying to place a call with the given array of destinations from tcl script. I have 3 destinations and if 1st destination fails to connect. The router didn't try the next destination. I was using IOS12.3 before which fail to other destination...

Dear All how can i put logo.xml for 7940 IP phone in CCM 5.1, i make all procedures but i need how to upload this XML file to be browsed in CCM5.1Kind Regards

I'm new to CCM LDAP intergation and would appreciated if anyone can shed some lights on this.I have a customer who wants to integrate their AD with CCM 5.1. The question I have is for CCM 5.x, it no longer does schema extension. Once CCM pulls the ...

Hi Voice Gurus,With LDAP sync with CCM, can I still use BAT to update all the users which CCM get from AD?Thanks.

Are there any issues with qos or anamolies to watch out for with VOIP when MPLS is added to a network?

Hi,I was wondering if I can use Tcl script on a Gateway router for a single annoucement something like "your call may be monitored for quality purposes" before the call cuts through to an Attendent console main DID? And if so would it also work in Sr...

CCM 4.2(3)sr1 OS Image 2000.4.4OS SR 2000.4.4aSR42851: c2800nm-spservicesk9-mz.124-11.T1.binPublisher on site, subscriber off site and is turned off due to no QoS on WAN.Extension Mobility configured.During SRST, IP Phones are registering incorrectly...

Which s/w release enables users to login/out of a line group via phone? I'm looking for a list of 'soft' features that will help me convince managers we need to upgrade from 4.1.3