Good morning I've installed, configured and connected to an fxs port one cordless.
I've assigned to this phone the same switchboard extension.
In this mode whn the incoming call arrive on the switchboard the ipphone rinnging and ringing also the cordless.
I check all but the cordless doesn't ringing.
I've created the following configuration:
voice-port 0/3/1
compand-type-a-law
cptone IT
bearer-cap Speach
!
dial-peer voice 551 pots
destination-pattern 551
port 0/3/1
!
ephone-dn 51 dual-line
number 551
pickup-group 10
label 551
name 551
call-forward noan 11111 timeout 12
!
ephone 15
mac-address aaaa.bbbb.cccc
username "pippo" passwrod 1234
paging-dn 10
type 7960
button 1:51
!
ephone-hunt 1 sequential
pilot 11111
list 552, 531, 557
final 551
timeout 10, 10,10
can you help me to solve this little item?
thanks in advance
regards
giancarlo
