I wonder if CME routers can be configured in a redundat mode for both Internal calls and PSTN inbound and outbound calls. Since we have redundancy for CUCM can any one tell me if it is possible to apply the same concept to CME.
I know that this will require the two routers to have the same or similar hardware configuration. I want to setup two CMEs so that when one CME becomes unavailable, all call processing should fall to the second CME or to share the call processing load between the CMEs.
Is this possible?
If yes, what type of spilter do I need to connect my PSTN lines to the FXO ports on the two routers?
What other components is required?
Where can I get the step-by-step guide to achive this.
Hi, My name is JanetMy portal ID is https://nwswdvcas-taw.my.webex.com/meet/janet.dvcasI do want you please to delete both my accounts with Webex (free and Paid)So my organisation can join me on another Webex Account as another Host. I did foll...
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From email@example.com (Gateway - Private IP 172.24.10.6) and i need firstname.lastname@example.org (Gateway - Public IP 18.104.22.168). How can I change in theGateway the ...