CME Calling Party shows unknown number on Phones

[suaybaguio]

        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98387 
                Exclusive, Channel 7 
        Progress Ind i = 0x8183 - Origination address is non-ISDN  
        Calling Party Number i = 0x21A0, '2258' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0xA1, '1005' 
                Plan:ISDN, Type:National

****

Need help in figuring our why Calling Party doesn't show on my cisco phone, but it shows in my debug. On my phone it says 'From Unknown Number' but on debug it clearly have the calling party provided by the other end.

Thanks!

Arbin

[Vinay Sharma]

Community Moderator notes: Moved the content to correct community.

[suaybaguio]

which community? can you show me...

Thanks!

Arbin