11-30-2012 06:03 AM - edited 03-16-2019 02:29 PM
Hey guys,
I am setting up my first lab. Im starting with CME and the issue I am running into is that I seem to be missing the configuration files for my test phones which are 6921's. I can see in the TFTP log that the phone is looking for the following files but not sure what my next step is.
XMLDefault.cnf.xml
SEP44D3A253572.cnf.xml
CTLSEP44D3A253572.tlv
Thanks for your help!
-Josh
11-30-2012 06:08 AM
also, here is my config:
site-A#sho run
Building configuration...
Current configuration : 1839 bytes
!
! Last configuration change at 08:06:11 UTC Mon Nov 12 2012
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname site-A
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
dot11 syslog
ip source-route
!
!
ip cef
!
!
ip dhcp pool LAN
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
!
!
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
crypto pki token default removal timeout 0
!
!
!
!
license udi pid CISCO2811 sn FTX1242A1WV
!
!
!
!
!
!
!
interface Loopback0
no ip address
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.10.10.1 255.255.255.0
duplex auto
speed auto
!
interface Async0/1/0
no ip address
encapsulation slip
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging esm config
!
!
!
control-plane
!
!
voice-port 0/3/0
!
voice-port 0/3/1
!
voice-port 0/3/2
!
voice-port 0/3/3
!
!
!
mgcp profile default
!
!
!
!
telephony-service
no auto-reg-ephone
max-ephones 20
max-dn 20
system message ENGELS ENTERPRISES
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Nov 11 2012 17:00:11
!
!
ephone-dn 1 dual-line
number 2222
description Mr. Engels
!
!
ephone-dn 2 dual-line
number 2223
description Nelda Rodriguez
!
!
ephone 1
mac-address 44D3.CA25.3572
max-calls-per-button 2
type 6921
button 1:1
!
!
!
ephone 2
mac-address 0007.7DDF.F0A0
button 1:2
!
!
!
!
line con 0
line aux 0
line 0/1/0
stopbits 1
speed 115200
flowcontrol hardware
line vty 0 4
login local
transport input all
!
scheduler allocate 20000 1000
end
11-30-2012 06:13 AM
I figured it out!
I was missing once command:
"ip source-address 10.10.10.1" under telephony-service.
Feel free to mark this answer as correct so this shows up as answered.
thanks everyone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide