Hello team,
I used to have an ephone configuration (SCCP) but since the phone was damaged I had to introduce a new SIP phone via register pool:
Ephone:
ephone 24
mac-address XXXX.XXXX.XXXX
username "423" password 423
type 6921
button 1:24
!
ephone-dn 24 dual-line
number 423
call-forward busy 400
call-forward noan 400 timeout 20
corlist incoming interna
!
Voice Register Pool:
voice register dn 50
number 423
no allow watch
call-forward busy 400
call-forward noan 400 timeout 20
mwi
!
voice register pool 50
busy-trigger-per-button 1
id mac XXXX.XXX.XXXX
type 7811
number 1 dn 50
dtmf-relay rtp-nte
The 7811 is registered, but I can't make calls, even after applying the "cor incoming interna default", similar to the ephone "corlist incoming interna".
Can you please let me know what am I doing wrong?
Thank you!