11-20-2007 04:54 PM - edited 03-15-2019 07:20 AM
Guru's,
I have to install a CME/CUE in Amsterdam,Netherlands very soon. Does anyone have example confgs or know of a good document that shows how to set up the proper dial-peers for in/out phone calls for this area?
Thx
11-21-2007 04:39 AM
Here an example:
dial-peer voice 1 pots
description ** E1 PRI pots dial-peer **
translation-profile incoming Add-Extra-Digits-Incomming
incoming called-number .
direct-inward-dial
port 0/3/0:15
dial-peer voice 100 pots
description ** E1 PRI pots dial-peer national calls**
destination-pattern 00[1-7]........
port 0/3/0:15
forward 10
dial-peer voice 102 pots
description ** E1 PRI pots dial-peer local calls**
destination-pattern 0[1-9]......
port 0/3/0:15
forward 7
dial-peer voice 110 pots
description ** E1 PRI pots dial-peer 0800 numbers**
destination-pattern 0080T
port 0/3/0:15
prefix 080
dial-peer voice 120 pots
description ** E1 PRI pots dial-peer 090x calls**
destination-pattern 0090T
port 0/3/0:15
prefix 090
dial-peer voice 130 pots
description ** E1 PRI pots dial-peer international calls**
destination-pattern 000T
port 0/3/0:15
prefix 00
dial-peer voice 200 pots
description ** E1 PRI pots dial-peer **
destination-pattern 112
port 0/3/0:15
forward-digits 3
!
dial-peer voice 201 pots
description ** E1 PRI pots dial-peer **
destination-pattern 0112
port 0/3/0:15
forward-digits 3
11-25-2007 09:14 PM
Sebastiaan,
Awesome! Thank you sir for the example dial-peers. I believe they use FXO lines instead of a PRI, but I would think that the destination patterns would still be the same. Also what exactly are the 200/201 dial-peers for?
Thx again!
11-26-2007 03:57 AM
200/201 are emergency numbers. The number is 112 and 0112 is the number for users who dial the 0 for an outside line by mistake. See also 911 and 9911
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: