01-12-2015 06:34 AM - edited 03-17-2019 01:33 AM
Hi All,
currently, i configure callmanager express.
then i want to activate the GUI, i already follow configuration from this link http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmegui.html
but when i go to "http:ip_cme/ccme.html" i can insert the username and password, but then i only get blank page.
here i post the configuration in ip http and telephony service:
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/GUI
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 1 transcoder
sdspfarm tag 2 conference
conference hardware
no auto-reg-ephone
max-ephones 150
max-dn 300
ip source-address 172.16.49.2 port 2000
timeouts interdigit 2
time-zone 41
time-format 24
max-conferences 10 gain -6
moh enable-g711 "flash:/music-on-hold.au"
web admin system name admin secret 5 $1$sQqb$lHn6cdM.CLWM5cJJg3HlE.
web admin customer name administrator secret 5 $1$/epO$y9ZO78G4fHWT2XbFPVvJg1
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
do i make mistake?
Please, help.
Thx,
Anju Josua
Solved! Go to Solution.
01-12-2015 07:47 AM
Can you try below commands and test..
ip http secure-server
file privilege 0
Suresh
01-12-2015 07:47 AM
Can you try below commands and test..
ip http secure-server
file privilege 0
Suresh
01-12-2015 10:20 PM
Dear Suresh,
yes, i need to add "file privilege 0".
since cme 8.8 this command is needed.
thanks for your time.
Regards,
Anju
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide