CME Mixed Mode Shared Line Issue

[derveniss]

Hallo team

On CME 10.5 I configured a mixed mode shared line but I face an issue. When I try to call the number 160 only the SCCP Phone rings.

I can make outbound calls from both SCCP and SIP Phone

SIP Firmware: sip78xx.10-1-1SR1-4

Here is the config:

voice register dn  16
 number 160
 allow watch
 shared-line max-calls 4
 no-reg
! 

 voice register pool  16
 busy-trigger-per-button 2
 id mac E0D1.XXXX.XXXX
 type 7861
 number 1 dn 16
 presence call-list
 dtmf-relay rtp-nte
 voice-class codec 1
 username 160 password 160
 no vad

!

ephone-dn  16  dual-line
 number 160
 shared-line sip

!ephone  16
 mac-address 7426.XXXX.XXXX
 max-calls-per-button 4
 type 7925
 button  1:16
!

Thanks!

[derveniss]

nobody?

[OBINNA EMESORONYE]

Hello Derveniss,

Please could you share how you were able to workaround this issue?

I am currently facing something a bit similar to what you faced.

SCCP(7926) and SIP(7821)

SIP is able to make and recieve calls but SCCP can only receive calls but not make calls.