12-22-2011 11:58 AM - edited 03-16-2019 08:40 AM
i have a CME in SiteA and another CME in SiteB, when call made across site, we experience noise and i have checked the codec used which is G.729. please what might be the problem.
12-22-2011 02:45 PM
Hi
You will need to have QOS configured accross the WAN
Regards
Alex
12-22-2011 03:31 PM
Please can I see a sample config for the IP WAN qos?
12-22-2011 09:06 PM
Hi,
Please see below QOS SRND. It has QOS for all type of WAN connection.
http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
Regards
Ronak Patel
12-23-2011 01:25 AM
Hi,
To back up what Ronak has sent. (+5 Ronak)
Remember if your WAN is via a Service providers network PEs,MPLS etc etc you need to
ask/buy QOS from them as well as setting up your own CE routers etc.
It is a big subject which needs to be considered before deploying any WAN based IPT/UC solution.
Regards
Alex
12-24-2011 02:33 PM
Hello
i have checked the QOS SRND guide but didnt find what suit my need, please can i get an example config for the IP WAN QOS for point to point link below 768, do i need to enable cRTP on the link?
please help as this noise is getting too much, thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide