CME Version 8.6 and cisco jabber

[lgrusila avain]

Hi

We have a cme version 8.6 and we are wondering if we can configure a cisco jabber into our mobile phones

We have android platforms and iphone

Thank you                  

[Carlo Poggiarelli · Accepted solution]

Hi

Sure you can.

You have to define it as registrer pool.

Here you have an example.

voice register dn  1

number 2000

name Carlo-Jabber 2000

!

voice register pool  1

registration-timer max 720 min 660

id mac 1234.5678.0987

session-transport tcp

type Jabber-Android

number 1 dn 1

username carlo password cisco

codec g711ulaw

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[islam.kamal · Accepted solution]

Hi

In addition to the professional configuration of Mr/Carlo , Please also find the below document which shows you that V8.6 support jabber + required configuration.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1063949

Thank you

Please rate all useful information

[lgrusila avain]

Carlo and Islam

Thank you so much

What about UC540 .Its the same philosophy as the above right?

What about if in the type : the cisco jabber is not available and is available only the CiscoMobile-iOS

We have to upgrade the ios  right?

[Carlo Poggiarelli · Accepted solution]

Hi.

Iphone is the only mobile phone supported by UC5XX because of the release of CME they run.

https://supportforums.cisco.com/docs/DOC-9827

CiscoMobile-iOS is the right device type

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[lgrusila avain]

Carlo

so the only option into UC540 is for iphone only?

[Carlo Poggiarelli]

Hi.

For the roadmap I posted above, it seems so

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

[lgrusila avain]

Ok clear

From the config i dont see also any other device type for example sip device type for any other sip application

So assume that is not supported also any other sip application

[islam.kamal]

Hi

For above configuration of type Jabber-Android.  Here we specify the sip client type. It can either be CiscoMobile-iOS for Apple iPhone users or Jabber-Android for Android users

Thank you

Please rate all useful information

[lgrusila avain]

iSLAM

Is available only the CiscoMobile-iOS for our device so for android is not any option

That is clear

What i am wondering if we could use other application than jabber with sip profile configuration

but as i see is not any option for sip device except teh default for jabber (either iphone or android)

[islam.kamal]

Hi

ohhh , so under type there is no jabber-android. How can if you use CME v8.6 , this will not work if you assign sip application , should mention on type jabber-android.you can try , and i will search for you about files for jabber should be on your flash , to enable jabber-android.

Thank you

Please rate all useful infromation

[islam.kamal]

Hi

I think jabber-android only availble on V9 , but i will search about v8.6

Thank you

Please rate all useful information