compatible cucm and unity connection version

[shohamshalom]

hello

i have unity connection ver 8.0.3  and cucm manager 8.0.3

i need to upgrade the cucm to ver 8.5

did it works?

i cant find some doc about it

tk

[Rob Huffman]

Hi there,

Supported Version Combinations for Cisco Unity Connection and Cisco Unified Communications Manager

#

Cisco Unity Connection 2.x and Later

#

Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html

Cheers!

Rob

[shohamshalom]

thanks rob

but the pdf shows that there is not compatible  between unity connection 8.0.3 with cucm 8.5(express)

and also i have cucm manager and not the express

please have a look the attach

[Rob Huffman]

Hi there,

The first portion of the doc as well as the clip I linked, refers specifically

to CUCM not CME

Cheers!

Rob

[shohamshalom]

thanks man

u the best!!!!!

[Rob Huffman]

Hi there,

Please disregard the info related to CME ...it just happens to be on the same

doc as the CUCM references and has no bearing on anything related to CUCM

and CUC compatibility

The **only** part that matters is this;

Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.

This means that CUC 8.0(3) would work with the following;

CCM 4.1(3),4.2(x) and 4.3(x)

CUCM 5.x,6.x and 7.x all versions

CUCM 8.0 and 8.5 all versions

Cheers!

Rob