08-11-2014 02:34 AM - edited 03-16-2019 11:41 PM
Hi,
Is there anyway to add Conference Phone 8831 to CUCM 7.1.3?
in datasheets it is only for CUCM 7.1.5+,
Solved! Go to Solution.
08-11-2014 02:52 AM
No, its not possible. You need to upgrade it to 7.1.5 and then apply device pack top if it.
Suresh
08-11-2014 02:52 AM
No, its not possible. You need to upgrade it to 7.1.5 and then apply device pack top if it.
Suresh
08-11-2014 03:07 AM
Thank you Suresh
So I've to download 7.1.5 update image file from Cisco Site , but i found two images
7.1(5b)su6a US Export Restricted - full encryption capabilities (non-bootable) - For upgrade from 7.x. "UCSInstall_UCOS_7.1.5.35901-1.sgn.iso"
7.1(5b)su6a US Export Unrestricted - fewer encryption capabilities (non-bootable) - For upgrade from 7.x. "UCSInstall_UCOS_UNRST_7.1.5.35901-1.sgn.iso"
which one should I select
and is the upgrade will be easy task like installing device package withount need to re-configure anything
08-11-2014 03:19 AM
It depends on what CUCM you running whether it is restricted or unrestricted, you can find it with the help of below link. If CUCM is installed as restricted then you must go for restricted version (UCSInstall_UCOS_7.1.5.35901-1.sgn.iso) only.
https://supportforums.cisco.com/discussion/12079741/how-find-installed-cucm-iso-restricted-or-unrestricted
If you plan well, then it is not a difficult activity its like device pack installation just you need to switch the version after new iso installation and you dont need to reconfigure anything except frimware; if you dont want to update the firmwares then you can revert back the firmware names in device default.
Suresh
08-11-2014 03:19 AM
Thank you, I really apreciate your answers
08-11-2014 03:24 AM
You r most welcome :-) I am glad that I answered your queries.
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide