02-16-2017 05:07 AM - edited 03-17-2019 09:32 AM
I have a router CISCO2921/K9 software Version 15.4(3)M1, RELEASE SOFTWARE (fc1) with Cisco Manager Express(CME) 10.5 with SIP 3905 phones, Skinny CP8941 and CP7965 phones. Need help/guide on configuring calling restriction.
CONFIG (Version=10.5)
=====================
Version 10.5
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address 10.10.3.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
load 7965 SCCP45.9-4-2SR1-1S
load 8941 SCCP894x.9-2-2-0
max-ephones 100
max-dn 300
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
CONFIG [Version=10.5]
========================
Version 10.5
Mode is cme
Max-pool is 100
Max-dn is 100
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Forced Authorization Code Refer is enabled
Source-address is 10.10.3.1 port 5060
Load 3905 is CP3905.9-4-1SR1-3
NTP Server Address is 10.10.3.1
NTP Server Mode is: unicast
Time-format is 12
Date-format is D/M/Y
Time-zone is 31
Hold-alert is enabled
Mwi stutter is disabled
Mwi registration for full E.164 is disabled
Forwarding local is enabled
Video is enabled
Camera is enabled
Privacy is enabled
Privacy-on-hold is disabled
Conference hardware is disabled
Dst auto adjust is enabled
start at Apr week 1 day Sun time 02:00
stop at Oct week 8 day Sun time 02:00
Call List BLF is enabled
Max redirect number is 5
IP QoS DSCP:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for service
Telnet Level: 0
Tftp path is flash:/its
Generate text file is enabled
Tftp files are created, current syncinfo 0014650255134712
OS79XX.TXT is not created
02-16-2017 05:18 AM
Hi Revocatus,
Below link talks in detail how to implement COR on CME.
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/42720-configuring-cor.html
http://www.voicecerts.com/2010/07/configuring-class-of-restrictions-cor.html
https://www.youtube.com/watch?v=4g63CKMGac4
(Rate if it helps)
JB
02-16-2017 05:25 AM
Hello Jitender,
Thanks for your prompt reply, I have seen this document but doesn't guide anything on SIP Phones how to.
02-16-2017 05:30 AM
Hi Revocatus,
See below for SIP phone
https://supportforums.cisco.com/discussion/12431306/sip-phones-cme-corlist
https://supportforums.cisco.com/discussion/10509956/cor-list-sip-phones
JB
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide