Configuring Mitel Handset on CUCM

[Lucky19th]

Has anyone got any experience of registering a Mitel handset as a 3rd Party SIP device onto a Cisco Call Manager (8.x) ?

I have some Mitel 5312 and 5324 handsets that I would like to work with the CUCM version 8.6.

I am not very well versed with Mitel handsets and would appreciate if anyone out there could share their experience with me

Thanks in advance

Lucky19th

[Ayodeji Okanlawon]

I doubt if those phones are supported on cucm..Here is a list of approved 3rd part sip phones and I dont see any Mitel there

http://www.tekvizionlabs.com/3rdpartyprograms/sip_verification/verified_products.php

But you can try and configure them as a 3rd party sip phone. NB they wont be supported by cisco

Here is a link to how to configure them

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b09sip3p.html

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson