cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
357
Views
0
Helpful
3
Replies
Highlighted
Beginner

Configuring sip channels on cisco 2911 Gateway

I have got 4 Cisco 7960 IP Phones Registered with this Router. I have got 4 SIP Channels. Could anyone suggest any link or configuration to do on this router to make SIP calls. I would like to configure these channels on this router. I have already running ISDN 2 lines using this gateway router.

Thank You

Regards

3 REPLIES 3
VIP Advisor

Configuring sip channels on cisco 2911 Gateway

Is this in conjunction with CUCM, CME or something else as a "PBX"?

=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

Beginner

Configuring sip channels on cisco 2911 Gateway

Im Using CME right now.

VIP Advisor

Configuring sip channels on cisco 2911 Gateway

well you would need to start creating a dial peer that points to your ITSP.

check this repost of a cisco Live prezzo on "PSTN" SIP Trunk configuration:

http://stor.balios.net/Live2012/july-26-cube-randy-wu-presentation-regular-size-modified-randy.pptx.pdf



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards