09-03-2010 05:15 PM - edited 03-16-2019 12:37 AM
Hello,
I have recently ordered CP 9971 with CP-CAM.
i wanted to use this with CME, i have 3925 with CME 7.1 installed.
Just realized that this phone is SIP only. I will appreciate any help with configuration of this phone with existing network and integration between SCCP and SIP.
Regards
AAli
09-03-2010 05:49 PM
Hi Asim,
Here are the supported IP Phone models for the latest CME version 8.1
There does not seem to be support for the 9971 even in this version
Table 2. Supported Cisco Unified IP Phone Models
# Executive | # Manager | # Business | # Basic |
# Cisco Unified IP Phone 7975G | # Cisco Unified IP Phone 7965G | # Cisco Unified IP Phone 7945G | # Cisco Unified IP Phone 7911G |
# Cisco Unified IP Phone 7971G-GE | # Cisco Unified IP Phone 7962G | # Cisco Unified IP Phone 7942G | # Cisco Unified IP Phone 7906G |
# Cisco Unified IP Phone 7970G | # Cisco Unified IP Phone 7961G-GE | # Cisco Unified IP Phone 7941G-GE | # Cisco Unified Phone 3911 |
# Cisco Unified IP Phone 7961G | # Cisco Unified IP Phone 7941G | # Cisco Unified IP Phone 6901 | |
# Cisco Unified IP Phone 7960G | # Cisco Unified IP Phone 7940G | # Cisco Unified IP Phone 6911 | |
# Cisco Unified IP Phone 6921 | |||
# Cisco Unified IP Phone 6941 | |||
# Cisco Unified IP Phone 6961 | |||
# Multibutton | # Mobility | # Conference Stations | # Video Telephony |
# Cisco Unified IP Phone 7931G | # Cisco Unified Wireless IP Phone 7920 | # Cisco Unified IP Conference Station 7936 | # Cisco Unified Video Advantage |
# Cisco Unified IP Phone Expansion Module 7914, 7915, and 7916 modules (56 buttons maximum) | # Cisco Unified Wireless IP Phone 7921G and 7925G models | # Cisco Unified IP Conference Station 7937 | # Cisco Unified IP Phone 7985G personal desktop videophone |
# Cisco IP Communicator Softphone for Windows | # | # |
From this good doc;
Cisco Unified Communications Manager Express 8.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps4625/data_sheet_c78-611137.html
The data sheet for the 9971 still shows only CUCM for call control;
Cheers!
Rob
09-04-2010 07:36 AM
Hello rob,
I guess so, But dont know why they still show the Photo of the 99xx video phone in figure there.
Thank YOU .
Found this usefeull doc, May be 9971 is on Roadmap.
09-04-2010 09:47 AM
Support for 9900 series is already in the roadmap and shouldn't be long before those are supported in CME. Initial support will be only for phone use, video will come until a later CME release.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide