Cube FL-cube-4 Eval license ?

[William Cooper]

         I have walked into a shop that has a SIP (T1), I know , I know.

         This ciruit is only being used to eval future migration off of ISDN PRI's.

         I will be terminating the T1 on one of our existing gateways (ISR 2801) that is controlled by CUCM

         8.0 via MGCP.

         How can I gen an eval license, this will never be used in production. its just for proof of concept.    

         The ios on the 2801 is currently c2801-ipvoice_ivs-mz.151.-4.M6.bin, which will support the additional

         cube feature license.

          The router will not accept the "mode border-element" command, this is what leads me to think I need the

          additional cube feature license...is this correct ?

          any replies appreciated.

          Thanks,

          Bill

[Jonathan Schulenberg · Accepted solution]

The mode border-element command is only available on ISR G2 hardware. The CUBE license is Right to Use (i.e. paper, not a key) so there is no demo license available. You can configure and it will work but will not be legally entitled to the feature or support on it.

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/prod_white_papers_list.html

Please remember to rate helpful responses and identify helpful or correct answers.

[William Cooper]

Jonathon,

Thank you for the clarification.