Greetings,
I have a CUCM 4.2 and a 4.3 cluster. Each cluster has a remote site or two hanging off of it. Since the different clusters are the result of an acqusition, there is overlap in the dialplans. using an ICT we are appending additional digits to the front of the Calling Number but in order to get it to work properly we had to add the digits on the ICT. Thus we can only add digits for one site, and not the others. Although this works now, it is not scalable.
What I would like to do is SIP trunks between the 4.x Clusters. First trunk on port 5060, second on 5061 etc. I could then use manipulate the digits by send traffic from a specific site down a specific trunk. The question is, will this work?
Collapsing the clusters into one and upgrading is in the works, but is still a ways out.
Purchasing additional hardware is not an option at this time.
Additional acquisitions are possible which is why this is becoming an issue.
Any ideas would be appreciated!
