01-05-2009 04:48 PM - edited 03-15-2019 03:20 PM
Dear all
I have a MCS-7835H2
when I want install CUCM 7.0 on it..
after sanity check disk it give me thta hard disk test passed.
but suddenly breake the setup proccess for an error.
the critical error is : can not find bios file version 7835h2-2333 in
i have upgraded all of my HP server bioses. but the problem remains.
the point is that i can install CUCM 6.0 easy!
please help me.
01-09-2009 09:20 AM
The installation may not support the system BIOS family. This message may display if the server is not supported. Before you proceed with the installation, correct the problem.
05-23-2012 03:18 AM
Hello Experts
We are facing same issue for installation of CUCM 7.0
Error: Did not find BIOS version file for 7835H2-2333 in.
Please comment.
Regards
Sajeel Akram
05-23-2012 03:24 AM
Hi Sajeel,
What exact hardware you are using to install.
Regards
Ronak patel
Rate helpful posts.
05-23-2012 03:31 AM
Hi Ronak
we are using
Platform Type 7835H2
Processor Speed 2333
CPU Type Intel(R) Xeon(R) CPU 5140 @ 2.33GHz
Memory 2048 Mbytes
Regards
Sajeel
05-24-2012 02:13 AM
Hi experts
We update the Bios of the server but problem is still there.
Anyone can guide in this issue.
Regards
Sajeel
05-24-2012 02:32 AM
Hi,
Just looking online now and some one has had similar problems you are having..
https://puck.nether.net/pipermail/cisco-voip/2011-September/023865.html
Get this error installing CCM 8.0.2(C):
"ERROR: did not find BIOS version file for HP7835H2-23333 in"
BIOS version of server is P56 07/10/2009
And the resolution was to downgrade the bios
"OK, just in case anyone else runs into this, I downgraded the BIOS to
2008.08.03 and then ran the install for 7.1.5 and it recovered"
05-25-2012 03:59 AM
Hi,
Issue has been resolved after changing the installation media.
thanks for support.
regards,
Sajeel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide