CUCM 7.1.5 - EXCHANGE 2010 SIP TRUNK

[sundarr]

Hi

SIP trunk established successfully between CCUM 7.1.5 to Exchange 2010.

In the sip trunk if redirection diversion header delivery enabled is selected for both outbound and inbound - trunk breaks.

Standard sip profile and non secure sip trunk security profile are used. Any suggestions?

Appreciate your response.

regards

Sundara

[raja Saravanan]

Sundar,

               Why do you require diversion header for both inbound and outbound calls ? for incomingcalls to reach the proper subscriber, diversion header is required, for outbound calls, I feel called number is sufficient, please correct me, If I am wrong.

cheers,

Shaggy