05-16-2012
02:05 AM
- last edited on
03-25-2019
08:15 PM
by
ciscomoderator
Dear All,
We're using CUCM Version 8.6 and mgcp gateway Cisco 2921 with FXO port. We're facing these problem:
1. When the first call from PSTN to IP SCCP Phone via FXO port, we see the number. But from the 2nd call, we see "unknown". We do shut/no shut on voice-port, and we only the the number at the first call, from the 2nd call, we always see "unknown". How can we solve this problem?
2. When call from PSTN to IP SIP Phone via FXO port, we always see the IP of CUCM. How can we solve this problem?
We've opened TAC for weeks and nothing new.
How can we solve this problem?
05-16-2012 09:34 PM
Can any one help us?
05-16-2012 10:30 PM
MGCP limitations with caller-id on FXO ports are well known, even if Cisco claims to have resolved them that doesn;t appears to be the case.
If you want full support for FXO ports on CUCM, use H.323 or SIP, not MGCP. Otherwise, open a TAC case, and good luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide