CUCM BE600 SIP TRUNK

[skakfinn1]

Hello,

      I have implemented a new BE 6000 all the basic configurations are done and the phones are ringing.  Now I would like to create the SIP trunk between my CUCM version 9.2. When I started creating a SIP trunk its asking for Calling Search Space Partition (CSS). I know how to create the partition the point is what kind of configurations should me made in the CSS parition

Please see the attached screen shot.

[Suresh Subramanian]

This CSS should have access to the partitions of Either the DNs or Translation patterns, so that the calls will reach its final destination.

[skakfinn1]

can you please guide me step by step may be i am not able to get you correctly

[Suresh Subramanian]

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmcfg/CUCM_BK_A34970C5_00_admin-guide-91/CUCM_BK_A34970C5_00_admin-guide-91_chapter_01001000.html#CUCM_RF_SBB2D11C_00