cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
120
Views
0
Helpful
2
Replies

CUCM - Extensions, IP's and Agent Name

KungFu_Monkey
Level 1
Level 1

Hi Guys, 

 

First post and a first time CUCM user so please be gentle with me! I'm looking to see if there is any way I can get a list of extensions, associated IP addresses and agent names. Ideally by logging into the CM CLI and grabbing the info?

 

Any help would be appreciated. 

 

Many Thanks

KFM

2 Replies 2

Jaime Valencia
Cisco Employee
Cisco Employee

DNs are in CUCM's DB, dnorpattern table, IPs are not in any table, only on runtime memory, you can search previous threads on how to get that info, and agent name, assuming it's also configured in CUCM under description, or user association, you might also get it, if not, you'll need to get the report from UCC. But you're looking at the very least, to manually having to combine, at least, 2 separate reports to get the info.

HTH

java

if this helps, please rate

Hi.

For Directory number and ip address association, you can login into cucm and issue the following command

 

show ridsb query phoneextn phone 

this command will give you two info:

 the state of ip phones (registered, unregistered) and their ip address

the status of directory number and their ip phone.

If on IP phone description , you specified the owner, than you will also have all info you need.

 

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"