cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5462
Views
0
Helpful
4
Replies

CUCM Insufficient number of Licenses error

yamikani2g2
Level 1
Level 1

The system is operating with an insufficient number of licenses. If additional licenses to cover the shortage are not configured in your Enterprise License Manager within 52 days, you will no longer be able to provision users and devices.

 

What do you suggest i do here please attached is a report

 

 

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

Go to your PLM to find out exactly which licenses are needed, then there are basically two options, either you buy the licenses that you need, or you delete those devices so you only use the licenses you currently have.

HTH

java

if this helps, please rate

View solution in original post

4 Replies 4

Jaime Valencia
Cisco Employee
Cisco Employee

Go to your PLM to find out exactly which licenses are needed, then there are basically two options, either you buy the licenses that you need, or you delete those devices so you only use the licenses you currently have.

HTH

java

if this helps, please rate

@Syed
Level 3
Level 3

As Jaime said, remove unwanted devices from cucm or procure license as per shortage.

Thanks this worked and the error went away i will be adding more devices

 

 

As long as you don't go above the licenses you bought, that will be OK, if you go above them, you'll get the error again.

HTH

java

if this helps, please rate