12-01-2014 03:26 AM - edited 03-17-2019 01:09 AM
Hi All,
Good evening.
We have Cisco Call Manager 8.6.x and MOTOTRBO RADIO server and mototrbo DP4000 Ex SERIES ATEX RADIO's. We are planning to integrate CUCM and MOTOTRBO so that VOIP users can communicate with RADIO devices. I found that this supports SIP integration. Can someone help me out in sharing the integration document?
Thanks in Advance.
Regards
Sankar.
12-01-2014 07:42 AM
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b09sip3p.html
12-01-2014 09:56 PM
Hi Valencia,
Thank you for your input.I understand that we need to add non cisco phone that support SIP as "Third Party SIP advanced." But we are using MOTOTRBO RADIO server for mototrbo DP4000 Ex SERIES ATEX RADIO's. So how do we integrate call manager with MOTOTRBO RADIO server.
Regards
Sankar.
12-02-2014 03:26 AM
If MOTOTRBO supports sip then create a SIP trunk in CUCM with its IP pointing to MOTOTRBO server. You can find many documents on how to create SIP trunk in CUCM. If you face call failure issue after setting up the trunk collect CUCM traces we will help you in narrowing down the issue.
06-10-2019 01:29 AM
are you able to configure it.......
Thanks
Faisal
06-10-2019 01:31 AM
Hi,
I need assistance in configuring the same..
were you able to configure it please share your experience.
06-10-2019 01:32 AM
Hi,
I need assistance in configuring the same..
were you able to configure it please share your experience.
@Bhavani Sankar wrote:Hi Valencia,
Thank you for your input.I understand that we need to add non cisco phone that support SIP as "Third Party SIP advanced." But we are using MOTOTRBO RADIO server for mototrbo DP4000 Ex SERIES ATEX RADIO's. So how do we integrate call manager with MOTOTRBO RADIO server.
Regards
Sankar.
09-19-2019 01:30 PM
did you achieve this integration?
I am investigating about this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide