CUCM Secure Mode

[Nathan Hardman]

HI All,

I have been asked if my CUCM is in Secure Mode or not, I can not find on the CUCM where this Reference is, does anybody have any idea's what this could be?

Thanks

Nathan

[Jaime Valencia · Accepted solution]

Enterprise parameters.

Cluster Security Mode:	This parameter indicates the security mode of the cluster. A value of  0 indicates Non Secure (phones will register in non-secure mode [no  security]); 1 indicates Mixed (the cluster allows the registration of  both secure devices and non-secure devices). Because this parameter is  read-only, to change the cluster security mode, you must run the CTL  Client plugin. Note: You must restart Cisco CallManager for the  parameter change to take effect.
	This is a required field.
	Default:                  0
	:                Restart Cisco CallManager service for the parameter change to take  effect.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk