CUCM Video Registered Endpoints Making Video Calls Using an IP Address

[jriacono5]

Hello,

We have several video endpoints registered to CUCM that has an integration with VCS-C/VCS-Expressway. We want to make outbound calls to H323 endpoints on the internet using an IP address. Would this be done using a SIP route pattern in the CUCM configuration? Could someone explain how this can be accomplished?

Thanks,
James

[George Thomas]

Unfortunately CUCM doesnt support IP address dialing. You could do the workaround mentioned in the appendix of the document: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

[Anas Abueideh]

Hi,

to dial ip address you need to register the endpoint in the VCS.

from CUCM you can dial digts and URI.

HTH

Anas

don't forget to rate the helpful posts