CUCM with external SIP Trunk

[cdbuckley]

Hello,

I have been trying to set up an external SIP trunk with CUCM 8.6. I wondered if anyone could point me in the right direction

I have the following details but not sure how to proceed in CUCM

[VOIP]

username=000000000

type=friend

secret=000000000

host=192.168.1.10

fromuser=000000000

context=from-trunk

allow=alaw

trustrpid = yes

sendrpid = yes

canreinvite = no

[Chris Deren]

CUCM does not support authentication trunks, you will need to deploy CUBE between the provider and CUCM.

Chris

[cdbuckley]

Thank you. I will attempt to set up a asterisk box.

[Chris Deren]

Not sure if I follow, are you saying you will ditch CUCM and implement Asterisk?

Is it for home system or something as you cannot compare the 2 for production environment.

HTH, please rate all useful posts!

Chris

[cdbuckley]

Sorry I am a little confused how would you recomment I implement CUBE. I have about 5 phones which I wish to set up in my home/office it's not a production environment. I assume I could probably get asterisk to connect to the SIP trunk and then pipe it to CUCM locally.