12-03-2014 11:29 PM - edited 03-17-2019 01:11 AM
Hey all,
I'm having a problem configuring a shared line on a Cisco IP-Phone 6941 and a 3rd party SIP device. When I call the shared line DN only the CP-6941 is ringing. Is there a known problem with shared line on 3rd party SIP devices on CUCME10?
My configuration:
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
h225 timeout t302 3
modem passthrough nse codec g711alaw redundancy maximum-sessions 15
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 120 min 60
voice register global
mode cme
source-address 10.16.1.250 port 5060
timeouts interdigit 3
max-dn 200
max-pool 42
load 6941 SIP69xx.9-3-3-2
authenticate register
authenticate realm lab.local
timezone 23
time-format 24
date-format D/M/Y
tftp-path flash:
file text
create profile sync 0021461723559918
network-locale DE
user-locale DE
camera
video
voice register dn 2
number 7002
name Test-Nr.2
huntstop channel 2
label Test-Nr.2
voice register dn 4
number 2010
shared-line
huntstop channel 2
voice register pool 1
id mac MAC-ADDRESS
type 6941
number 1 dn 4
username test1 password test1
codec g711ulaw
no vad
!
voice register pool 2
id mac MAC-ADDRESS
type 6941
number 1 dn 2
username test2 password test2
codec g711ulaw
no vad
!
voice register pool 6
id mac 0000.0000.0000
number 1 dn 4
username 2010 password 2010
description Gigaset 2010
codec g711ulaw
no vad
show sip-ua status registrar
Line destination expires(sec) contact
transport call-id
peer
============================================================
2010 10.16.0.3 22 10.16.0.3
UDP 1147098390@10_16_0_3
40002
7002 10.16.0.2 59 10.16.0.2
UDP a44c11d1-204e0006-00007348-00002b83@10.16.0.2
40004
7001 10.16.0.1 59 10.16.0.1
UDP a4934c40-6ddd0007-00004b72-000054c1@10.16.0.1
40001
2010 10.16.0.1 59 10.16.0.1
UDP a4934c40-6ddd0008-00007382-00007b13@10.16.0.1
40003
40002 voip up up 2010$ 0 syst ipv4:10.16.0.3:5060
40004 voip up up 7002$ 0 syst ipv4:10.16.0.2:5060
40001 voip up up 7001$ 0 syst ipv4:10.16.0.1:5060
40003 voip up up 2010$ 0 syst ipv4:10.16.0.1:5060
As you can see, the number 2010 is registered two times on the CUCME. So the shared line is active on both devices. But there is still the problem with call alerting on the 3rd party device.
12-05-2014 01:23 AM
No one with an answer?
Come on guys, why is it working on a CUCM10 but not on the Express?
07-09-2017 12:33 PM
Hello Andre!
Have you reslove problem (for 3rd SIP phone)?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide