02-18-2009 03:56 AM - edited 03-15-2019 04:18 PM
Hi!
We are able to register the sip phones but there are no communication signals, we cannot receive or make calls.
What could be the problem?
Thanks,
Ana Bartolomeu
02-24-2009 06:20 PM
Post the following output:
Output of the command 'show dial-peer voice summary'
Output of the command 'show sip reg status'
Enable 'debug ccsip all'
02-24-2009 07:20 PM
Hi Ana,
The 3911 will display it's DN while it is unregistered, unlike many other phones. This can lead you to believe the phone is registered when it's really not.
Can you post 'show sip status registrar'?
If the DN does not show up there, you will need to send us 'show run | s voice register' and 'debug ccsip messages' after you reset the phone.
-nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide